top of page
Search
How to Remove Weeds Between Pavers Properly

How to Remove Weeds Between Pavers Properly

Jack Kendall
Oct 28
5 min read

A tidy paved drive or patio can quickly lose its appeal when green growth starts pushing through the joints. Knowing how to remove weeds between pavers properly makes a real difference to kerb appeal, safety and the lifespan of the surface. The key is not simply clearing what you can see, but treating the roots and replacing the jointing material that helps keep fresh weeds at bay.

For homeowners across Bracknell, Wokingham and the surrounding areas, the best method depends on the age and condition of the paving, the size of the affected area and whether you want a quick improvement or a longer-lasting result.

Why weeds grow through paving joints

Weeds do not usually grow up from beneath a well-laid driveway or patio. Most seeds arrive from above, carried by wind, birds, pets and foot traffic. They settle in dust, leaves and organic debris that collects between the blocks or slabs. Once that material turns into a thin layer of soil, seeds have exactly what they need to establish themselves.

Open joints, loose sand and standing water make the problem worse. Moss and algae can also hold moisture in place, creating the damp conditions that encourage growth. This is why even a quality block-paved driveway can develop weeds if it is not cleaned and maintained over time.

Weeds are more than a cosmetic issue. Thick roots can disturb loose jointing, while slippery moss and algae can make paths and patios less safe in wet weather. On a driveway, neglected joints can allow pavers to shift gradually under regular vehicle use.

Remove weeds between pavers: choose the right method

There is no single treatment that suits every paved surface. Hand removal is effective for a few established weeds, while a larger driveway may need a combination of cleaning, weed treatment and re-sanding. Avoid harsh methods that could damage the paving, stain the surface or wash jointing material away unnecessarily.

Pull weeds out by the root

For a small number of weeds, hand weeding is often the most direct approach. Choose a dry day and use a paving knife, hooked weeder or narrow hand tool to loosen the plant from the joint. Aim to pull out as much of the root as possible rather than snapping the stem at the surface.

This works particularly well for larger weeds with visible roots, such as dandelions and plantain. Dispose of the weeds rather than leaving them on the driveway or patio, as some can still shed seed after being pulled.

Hand weeding takes time, but it gives you a chance to inspect the joints. If sand is missing or the edges of the paving feel loose, this is a sign that the area needs more than a quick tidy-up.

Use a suitable weed killer carefully

A ready-to-use systemic weed killer can be useful for weeds growing throughout a large paved area. It is absorbed through the leaves and works down into the root, making it more effective than simply cutting the weed back. Always select a product intended for hard surfaces and follow the manufacturer’s instructions precisely.

Apply it only on a calm, dry day, keeping it away from lawns, flower beds, drains, ponds and neighbouring planting. Do not use more than required, and keep children and pets away until the treated area is dry. Weed killer is most effective when plants are actively growing, usually from spring through to early autumn.

A contact treatment may make foliage brown quickly, but it does not always kill deeper roots. For stubborn, mature weeds, it can be worth allowing a systemic treatment time to work before pulling out the dead growth and cleaning the joints.

Try heat for light growth

A flame weeder or hot-air weeder can be a practical chemical-free option for young weeds, especially along patio edges and paths. The aim is not to burn the plant to ash. A brief pass of heat damages the cells in the leaves, causing the weed to wilt and die back.

This method needs care. Never use an open flame near dry leaves, timber fencing, artificial grass, vehicles, gas meters or combustible materials. It is also less suitable for deeply rooted weeds, which may regrow and need repeated treatment. For many households, a hot-air tool is the safer choice.

Be cautious with pressure washing

Pressure washing can transform the appearance of dirty block paving, but it is not a complete weed solution on its own. It removes surface debris, moss and many small weeds, yet it can also blast out the jointing sand that supports the blocks. If that sand is not replaced afterwards, the newly opened joints become an easy home for fresh seeds.

Use a fan setting rather than a concentrated jet, keep the nozzle moving and avoid pointing directly at the joints from close range. Slabs, older mortar joints and damaged pavers need particular care. If you are unsure, professional cleaning is often the safer investment than risking loose or marked paving.

Clean the joints before weeds return

Once the weeds are dead or removed, sweep the entire area thoroughly. Use a stiff outdoor broom to lift soil, leaves, moss and loose roots from between the pavers. Clearing this debris matters because it removes the growing medium that new seeds need.

For block paving, allow the surface to dry fully after cleaning, then brush kiln-dried jointing sand into the joints. Work in different directions so the sand settles evenly, and continue until the gaps are properly filled. Sweep away excess sand from the face of the blocks.

The correct jointing material depends on the surface. Traditional kiln-dried sand is common for block paving, while some patios and paved areas benefit from a jointing compound designed for wider gaps. Resin-bound surfaces should not be treated in the same way as block paving, as their construction and drainage characteristics are different. If you have any doubt, ask a paving professional before applying products to the surface.

Prevention is easier than repeated removal

A simple seasonal routine keeps most weed problems manageable. Sweep your driveway, patio or path regularly, especially in autumn when fallen leaves build up quickly. Clear soil from corners and edges, where weeds often take hold first, and deal with small shoots before their roots become established.

Pay attention to drainage too. Puddles, overflowing gutters and run-off from garden beds can wash soil into joints and leave the area damp. Improving drainage or repairing a damaged edge restraint can solve the cause of recurring growth rather than treating the same weeds every few months.

If weeds return in one particular strip, look for a practical reason. It may be a shaded area that stays damp, a joint that has lost its sand, or an overhanging hedge dropping leaf litter. A targeted repair often provides better value than repeated treatments.

When paving needs professional attention

Weeding and re-sanding are sensible maintenance tasks, but they will not correct an unstable or poorly drained surface. Call in an experienced contractor if blocks are rocking, joints are continually washing out, water sits against the property, or the driveway has noticeable dips and rutting. These signs may point to failed edging, inadequate foundations or drainage issues below the paving.

A well-prepared driveway or patio should be attractive, practical and straightforward to maintain. At Lay Away UK, we see first-hand how proper installation, sound drainage and the right finishing materials help paved areas stay neat for longer.

Tackle weeds while they are small, keep joints clean and full, and do not ignore movement or water problems. A little timely care protects the finish you paid for and helps your outdoor space remain something you are pleased to come home to.

 
 
 

Comments


bottom of page